Welder I

Install and troubleshoot 12V 110V and 3-phase electrical system components. Install aftermarket and OEM vehicle lighting and accessories.

Duties and Responsibilities:

• Must be able to perform QC repair and rework. 
• Understand and carry out verbal and written directions in English
• Close attention to detail
• Function with a minimal amount of supervision or no supervision.
• Set work priorities to meet production goals as scheduled per assigned department.
• Establish and maintain cooperative working relationships.
• Meet minimum standards of safety per assigned department.
• Meet minimum standards of housekeeping per assigned department.
• Meet all QA and QC standards for each task per assigned department. 

• Be compliant with all the rules of conduct and attendance per the company handbook.

• Ensure that hazardous waste is handled appropriately and placed into the proper container(s).
• Maintains all satellite and storage containers in a closed position unless adding or removing waste.
• Familiar with Hazardous Waste Contingency Plan.
• Knows spill response procedures and evacuation routes.
• Other duties and responsibilities as required.

Qualifications/Training:

• Ability to read, write, comprehend and communicate simple instructions, short correspondence and memos in English.
• Must be able to read and interpret engineering drawings, schematics, blue prints, engineering layouts, work orders and change orders.
• Ability to read and use linear and other measuring devices including, but not limited to volt meters and test lights.
• Ability to troubleshoot and repair electrical system components.
• Ability to perform all operations within acceptable quality and time standards.
• Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
• Fundamental use of various pneumatic and power tools.
• Familiar with the safe operation of various tools: including but not limited to drills, screw gun.
• Ability to use basic mathematics.
• Must have general knowledge of OSHA and EPA standards.
• Be trained in Hazardous Materials Handling Operations with an annual refresher course.
• Hazardous waste training shall be provided to employee within six months of the date the employee filled this position and a review of this training provided every 12 months thereafter.  Employee shall be supervised until training is complete.  This training will consist of at least 30 minutes of classroom instruction and additional on the job training as needed.
• Training will include familiarization with roles as outlined in Hazardous Waste Contingency Plan.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to handle, or feel objects, tools or controls; and reach with hands and arms. The employee frequently is required to walk.  The employee is occasionally required to stand, climb or balance, stoop, kneel, crouch, or crawl. Other physical requirements include:

• Ability to regularly lift and/or move up to 40#’s without assistance.
• Ability to work from various squatting, kneeling or bending positions.
• Ability to work with arms above head.
• Ability to work from ladders or scaffolding.
• Ability to stand at a workstation for ten hours a day (minus specified breaks.)
• Ability to perform all operations within acceptable quality and time standards.
• Ability to safely use specified hand, air, power tools, and machinery.
• Ability to operate and understand the operation of all protective safety equipment in the area.
• Specific vision abilities required by this job include close vision, peripheral vision and depth perception.
• Required to handle and dispose of hazardous waste.
• Ability to work in 105-degree heat for excess of ten (10) hours per day.
• Ability to work in noisy and dusty conditions.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles and vibration. The employee is occasionally exposed to toxic or caustic chemicals.

The noise level in the work environment is elevated.

Education and Experience:

• 1 year of experience in automotive electrical installation in a manufacturing environment.

Personal Protective Equipment Recommended and/or Required:

• Safety glasses.

• Earplugs.

• Work gloves.

REV Group is committed to a policy of equal employment opportunity. The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation, or any other basis prohibited by law. REV Group also undertakes affirmative action to assure equal employment opportunities for minorities and women, for persons with disabilities, and for protected veterans. 

NOTICE FOR CALIFORNIA RESIDENTS

Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights. Please click on the link for a description of those rights and how California residents may exercise them.